Lusithand Devices Rosa Overdrive
In Stock
In Stock
$315.00
Rosa Overdrive
The Rosa Overdrive is born from the concept of a drive pedal that emulates playing through a tube-amp, being pushed, compressed and saturated.
Go from fairly clean to well saturated (almost fuzz like) from one end of the Drive knob, to the other.
We also focused on the “feel” for the ROSA and how effortless it feels to play through it, either if you are playing softly, with your fingers at lower gain settings, or if you are digging in with a plectrum at higher gain settings.
Even though the Rosa Overdrive sounds at its best played with low-to-medium output basses, and it surely loves a P. Bass being played with a plectrum at full gain, it can retain its identity and character even with higher gain instruments.
The bottom end is big on this one!
Lusithand Devices
Pedals/Effects
Rosa Overdrive
In Stock
‘Rosa Overdrive’ Features: 9vDC to 18vDC operation (center negative) CL switch: this inserts a good amount of the clean signal into the mix. This is essential to get a cleaner sound at lower gain settings (there is always some grittiness on the regular tone) or to add definition and an amp-like-tone at higher gain. HOT switch: change the voicing of the Drive channel; down for cleaner and up for hotter and thicker. HI switch: extends the higher frequencies for the driven signal. DRIVE knob: (the magic control) go from slightly saturated to overly saturated and listen to your signal compress more as it gets dirtier, while maintaining some dynamics. EQZ knob: A Tilt Equalizer allows to gently (and musically) compensate for different sounding instruments. -When the EQZ pot is at 12, there is no colouring of the sound as it sits flat.. -Turn clockwise and the frequencies above the tilt point get boosted while the ones below get attenuated. -Anti-clockwise, the frequencies below the tilt point, get boosted while the ones above get attenuated. VOL knob: controls the overall volume of the pedal.