EBS Reidmar 502 Amplifier
Available to Order
$1,024.99
The EBS Reidmar 502 is a lightweight bass amplifier that breaks new ground with a powerful Class D power module co-developed by EBS to truly handle a 2-ohm load.
The Reidmar 502 delivers 500 W of punch, driving two 4-ohm cabinets with proper 2-ohm stability—rare for lightweight amps. EBS’s soft clip technology ensures powerful, dynamic sound without the excessive compression typically found in compact heads, providing you with tighter lows, clear mids, and crisp highs at any volume.
Its analog preamp features EBS’s adjustable compressor/limiter and a responsive 4-band EQ for precise tonal shaping. Extras include an effects loop, a balanced XLR output with pre- and post-EQ, a ground lift, a line output, and a headphone jack. Pair it with any EBS cabinet(s), from compact lightweight Neoline rigs to full dual 410 stacks, for stunning versatility.
Supplier
EBS
EBS
Classification
Amplifier
Amplifier
Model
Reidmar 502
Reidmar 502
Availability
Available to Order
Available to Order
Specifications
Features:
Type Analog Preamp, 2-ohm D-Class Power Amp
Compressor/Limiter: Built-in Compressor/Limiter
EQ: Extremely Powerful 4-band EQ
Effects Loop: Yes
Character Filter: Yes
Balanced XLR-Out: With Pre/Post EQ switch and Ground Lift
Line and Headphones Out: Yes
Output Power: 500 W
Specifications:
Input Impedance: 2 Mohms
Gain Range: -00 – +30 dB
Character Filter: Shelving, High/Low Pass, +7 dB @ 40 Hz, -2 dB @ 800 Hz, +3 dB @ 10 kHz
Tone Controls: Bass Shelving +/-18 dB @ 60 Hz, Mid Bandpass Filter 100 – 6000 Hz +/- 12-15 dB, Treble Shelving +/-18 dB @ 6 kHz, Bright Shelving +15/-0 dB @ 10 kHz
Balanced Output: -10 dBv, Pre/Post EQ, GND Lift
Output Power: 250 W RMS / 500 W RMS @ 4 and 2 ohms load respectively
Dimensions (WxDxH): 12.8 x 9.8 x 3.0″ (32.5 x 25 x 7.5 cm)
Weight: 3.3 kg (7.3 lbs.)
Features:
Type Analog Preamp, 2-ohm D-Class Power Amp
Compressor/Limiter: Built-in Compressor/Limiter
EQ: Extremely Powerful 4-band EQ
Effects Loop: Yes
Character Filter: Yes
Balanced XLR-Out: With Pre/Post EQ switch and Ground Lift
Line and Headphones Out: Yes
Output Power: 500 W
Specifications:
Input Impedance: 2 Mohms
Gain Range: -00 – +30 dB
Character Filter: Shelving, High/Low Pass, +7 dB @ 40 Hz, -2 dB @ 800 Hz, +3 dB @ 10 kHz
Tone Controls: Bass Shelving +/-18 dB @ 60 Hz, Mid Bandpass Filter 100 – 6000 Hz +/- 12-15 dB, Treble Shelving +/-18 dB @ 6 kHz, Bright Shelving +15/-0 dB @ 10 kHz
Balanced Output: -10 dBv, Pre/Post EQ, GND Lift
Output Power: 250 W RMS / 500 W RMS @ 4 and 2 ohms load respectively
Dimensions (WxDxH): 12.8 x 9.8 x 3.0″ (32.5 x 25 x 7.5 cm)
Weight: 3.3 kg (7.3 lbs.)